Home >> News
Shijiazhuang Everlight Trade Co.,Ltd.
Flux Cored Wire Gas-shielded Features
As mentioned before cored wire highlights the beneficial properties of many welding methods. For example flux portion covering Stick Electrodes played with molten filler metal can improve mechanical properties of the chemical composition and function. Features on production efficiency have gas shielded metal arc welding and submerged arc welding.
Flux Cored Wire Self-shielded
With a thin strip rolled into round or shaped steel tubing. Fill certain components within the powder, made by pulling seam cored wire. Steel tube filled with powder or drawn into seamless flux cored wire. This flux cored welding with high deposition efficiency. Steel adaptability, the trial period is short, so it's usage and scope has expanded. This wire is mainly used for carbon dioxide gas shielded arc welding, submerged arc welding and electroslag welding
Welding Wire
Welding Wire as filler metal, or both as a conductive wire with Welding Component. When gas welding and gas tungsten arc welding, wire is used as filler metal.
Carbon Gouging Rods Gouging Torch Applicatio
1) Carbon Gouging Rods Gouging Torch clean weld root. 2) Rods Gouging Torch beveling, especially in thick butt groove, tube butt U-shaped groove. 3) Rods Gouging Torch remove weld defects. 4) Rods Gouging Torch Clear casting flash, burrs. Casting mouth and lack of restrictions.
Principle carbon arc gouging, characteristics
1.Principle Gouging is the use of electric arc between the carbon rod and the workpiece heat generated by the metal melt. With compressed air to blow off the molten metal. So that the metal of a heat-planing processing groove.
Carbon Gouging Rods Gouging Torch
Manufacture of metal structures using welding techniques when. Must first be cut to conform to the shape requirements of the metal. Sometimes also need a variety of bevel planing. Clean weld root and remove weld defects.
Plasma cutting machine troubleshooting
Plasma cutting machine arc stability directly affects the cutting quality. Plasma arc instability will lead to cuts uneven buildup and other defects. Can also result in reduced lifetime of the device related to the control system, the nozzle, the frequent replacement of the electrode. For this phenomenon, analyze and propose solutions.
Plasma cutting machine failure and troubleshooting
Symptom: on the power switch, Plasma cutting machine power light is off. 1. Failure reason: the power supply switch off the fuse. Remedy: Replace. 2. Failure reason: the fuse box after the power off. Remedy: Check the replacement.
Plasma cutting machine maintenance
Such as the use of plasma cutting machines in order to more long-term. Users should be very routine plasma cutting machine for maintenance. And the correct way to use plasma cutting machines
Suppression measures such as plasma cutting machine power supply sectio
Plasma cutting machine CNC system is the most important source of interference power section. It is generally taken to ignite the arc frequency arc. High-frequency transformer secondary voltage up 3000-6000V. Facing Hz pulse frequency. Radiation interference and pollution on the grid (interference) are very strong. There are high-current AC and DC contactors and various relays off the grid can also cause surges.
Cutting Machine Routine maintenance
Note the use of cutting machines and routine maintenance. Hebei Machinery offers cutting machine, Plasma Cutting machine and cutting machine Accessories , etc.
The advantages of Plasma arc welding machine than other welding methods
a. Plasma arc welding machine with large energy density, directional arc strong, strong penetration ability. Without beveling, without a filler wire penetration circumstances 8 ~ 10mm thick stainless steel plate. Compared with TIG, under the same circumstances weld penetration. Plasma arc welding is much faster.
What is the main purpose of the welding helmet?
The main purpose of the welding helmet is: In the process of welding, for personal protection.It can prevent the welding head of workers from arc ultraviolet light and splash bead burns.
Compared with manual arc welding, Flux Cored Wire Gas-shielded has the following advantages:
① strong wind resistance, the protective effect is good, as long as the wind speed does not exceed 11m / s. Are not required to take any protective measures. Particularly suitable for field construction work
Compared to the lower cellulose electrode welding, Flux Cored Wire Gas-shielded has advantages:
Compared to the lower cellulose electrode welding, Flux Cored Wire Gas-shielded has advantages:
<< Previous 1 2 ... 32 33 34 35 Next >>
Products Catalogue
Home EquipmentConsumableRelative ProductsWorkshopVideoAbout UsNews News
Shijiazhuang Everlight Trade Co.,Ltd.
Contact Us
Add.: COFCO Hebei Plaza Build A, You Yi North Street No.345,Shijiazhuang,China
Tel.: +86-311-87055920 +86-311-85022601
Email: info@sino-welding.com
Recommended Products: Submerged Arc Welding Flux
All right reserved Shijiazhuang Everlight Trade Co.,Ltd. Technical Support Reanod