Home >> News
Shijiazhuang Everlight Trade Co.,Ltd.
How to Store Welding Rods?
Soldering is a fun hobby and an impressive career for those who desire to create. However, after the sparks have flowed and the welding has been completed, the welding rods (also known as electrodes) must be stored and put away correctly. But how do you store this holding metal?
Air Carbon Arc Air Planing Technique
The air-carbon arc gas planer removes metal by the intense heat of the electric arc generated between the carbon electrode and the workpiece. As the material melts, compressed air is directed through an outlet in the lower jaw of the torch where the electrode is fixed, thus lifting the molten metal out of the arc before it solidifies.
How to Weld Aluminum With a Wire Welder?
Welding aluminium can be very frustrating as the metal oxidises rapidly in the open air. In addition, oxidation can contaminate the weld seam and in some cases can create a fire hazard.
What Is Gas Cutting Process?
Gas cutting is done by preheating a spot on ferrous metal to its ignition temperature and then burning it with a stream of oxygen in the manner.
How Plasma Cuts Metal?
In cutting electrically conductive metals, the plasma cutting process uses this conductive gas to transfer energy from the power supply through the plasma torch to the metal to be cut.
How to Choose the Right Tungsten Electrode?
Thorium tungsten electrodes, which contain thorium oxide (Th02 or thorium oxide), are the most commonly used tungsten electrodes and have become a standard for judging the goodness of other tungsten electrodes. However, because of the low level of radioactive hazard associated with this tungsten electrode, many users have switched to other options.
How to Distinguish between Welding and Heating Equipment?
Welding is a manufacturing process that uses various fusible substances to join metals or other thermoplastic materials such as plastics through intermolecular contact on their surfaces under heat (or pressure) without being completely melted.
How to Weld Flux Cored Wire?
Flux cored wire CO2 welding, in addition to better welding quality than solid wire, its formation, spatter, beautiful sound! It can reduce the tension of welders. However, the fume level is larger than solid wire, must do a good job of protective measures. Flux cored wire suppliers explain how to weld flux cored wire.
How to Use the Torch Safely?
The torch should comply with the requirements of "Isobaric Torch and Cutting Torch" (JB/T794-1999) and "Injection Suction Torch" (JBT6969 a 1993). At present, the domestic widely used injection torch, its use of the main safety content is as follows.
What is the Working Principle of the Plasma Cutting Machine?
Generally speaking, plasma cutting compared to oxygen-acetylene gas cutting, due to the difference in working principle, so it can cut many jobs that cannot be done by oxygen cutting, to complete the cutting of non-ferrous metals.
How to Tell the Difference Between a Tungsten Electrode and a Bad One?
Tungsten, the metal with the highest melting point, has high density, hardness, wear resistance, corrosion resistance, ultra-high temperature resistance and other high performance, tungsten products are widely used in electronics, new energy, ships, vehicles, engineering machinery, nuclear power, aerospace, aviation, military and other fields.
How Flux Cored Wire is Made?
The flux-cored wire was developed in the early 1950s, but it was not until 1957 that it became commercially available. This method can be said to be a combination of the advantages of submerged arc welding and CO2 welding (refers to the solid), the flux encapsulated in the wire and protected by the periphery of CO2 gas can produce a softer and more stable arc when welding and low spatter as its characteristics.
What Are the Steps of Gas Cutting Operation?
Gas cutting mainly includes several operation steps such as preparation before gas cutting, flame adjustment, gas cutting, and cleaning after gas cutting. The gas cutting machine manufacturer explains the operation content and operation points of each step of using the gas cutting machine.
How to Install Aluminum Welding Wire?
The tensile and shear strength of the workpiece welded by aluminium welding wire (the joint firmness is not lower than the base material), electrical conductivity, and corrosion resistance are all good, and the quality is stable.
Why Choose to Use Gouging Carbon Rods?
Carbon arc gouging is a processing method to plan and cut the base material of metal by using the high-temperature electric current generated between the carbon electrode and the metal to partially heat the metal to the molten state and at the same time blow off the molten metal with the high-speed airflow of compressed air.
<< Previous 1 2 ... 11 12 13 14 ... 34 35 Next >>
Products Catalogue
Home EquipmentConsumableRelative ProductsWorkshopVideoAbout UsNews News
Shijiazhuang Everlight Trade Co.,Ltd.
Contact Us
Add.: COFCO Hebei Plaza Build A, You Yi North Street No.345,Shijiazhuang,China
Tel.: +86-311-87055920 +86-311-85022601
Email: info@sino-welding.com
Recommended Products: Submerged Arc Welding Flux
All right reserved Shijiazhuang Everlight Trade Co.,Ltd. Technical Support Reanod