Such as the use of plasma cutting machines in order to more long-term. Users should be very routine plasma cutting machine for maintenance. And the correct way to use plasma cutting machines. Such as
Correctly installed carefully torch. Make sure that all the parts fit well, make sure the gas and cooling air circulation. Install all the components on a clean cloth. Prevent dirt from sticking to the member. On the O-ring with appropriate lubricant to the O-ring is lit prevail, can not pay more.
2. Consumable parts to be replaced before the full damage
Do not use consumables completely damaged and then replaced. Because badly worn electrodes, nozzles and vortex ring will generate plasma arc uncontrollable. Plasma cutting machine can easily cause serious damage to the torch. So when first discovered cutting quality drops, it should be checked in time consuming parts.
3. Cleaning connecting thread torch
When replacing consumables or routine maintenance checks. We must ensure that the torch, external thread clean. If necessary, clean or repair connecting thread.
4. Cleaning the electrode and nozzle contact surface
In many of the torch, the contact surface of the nozzle and the contact surface of the electrode is charged. If the contact surface dirt
. Plasma cutting machine torch will not work properly. Use hydrogen peroxide type cleaning agent.
5. Check the gas and cooling gas per day
Check the gas and cooling air flow and pressure every day. If the flow is not sufficient or leaks. Should immediately stop line failure.
6. Avoid cutting torch collision damage
To avoid cutting torch collision damage. The system should be properly programmed to avoid overrun walking. Cutting torch damaged when installing anti-collision device can effectively avoid collisions.
